ULTIMATE series A7 Five-channel amplifier
Thursday, June 5th, 2008
Source : www.dls.se
ULTIMATE series A7 Five-channel amplifier rated at 4 x 60 Watts on the stereo channels plus 1 x 300 Watts from the mono sub channel.
Built to provide a complete in car entertainment system system with all necessary crossovers, all in one amplifier. For detailed information about the crossover possibilities please read the technical specifications.
Internal switches connects all amplifier inputs if you prefer to use only one RCA cable.
Built-in fan control. Remote sub level control with phase shift is included.
- RMS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,1% distortion.
|
Number of channels |
5 |
|
Amplifier class |
AB |
|
Output power in 4 ohm |
4 x 60 W |
|
Output power in 2 ohm |
4 x 100 W |
|
Mono bridge mode 4 ohm |
2 x 200 W |
|
Mono sub channel 4 ohm |
300 W |
|
Mono sub channel 2 ohm |
440 W |
|
Mono sub channel output in 1 ohm |
600 W |
|
Frequency range |
10 Hz - 50 kHz |
|
Damping factor |
> 200 |
|
S/N ratio, A-weighted |
> 100 dB |
|
Input impedance, high level |
N/A |
|
Input sensitivity |
0,3 - 7 V |
|
Input impedance |
> 10 kohm |
|
Filters channel A & B |
HP: 80 - 400 Hz / 1,6 - 8 kHz (x20) |
|
Filters channel C & D |
HP: 80 - 400 Hz. LP: 0,3 - 4 kHz / 3 - 40 kHz (x10) |
|
External cooling fan terminal |
1 |
|
Remote base level control |
1 |
|
Remote phase shift control |
1 |
|
Power consumption (idle) |
1,1A |
|
Power consumption (max) |
120 A |
|
Rec. power cable |
Minimum 4AWG / 21 mm2 |
|
Fuses |
2 x 35 A + 2 x 20 A |
|
Dimension (W x D x H) |
605 x 240 x 73 mm (23,82 x 9,45 x 2,87 inches) |
|
Weight |
8,1 kg ( 17,86 lb) |